Compressor Source 4 to 5 HP Air Compressor Pump Replacement Single Stage 3 Cylinder 10 - 12 CFM Max Cast Iron CS3065A

4-5 HP Replacement Single Stage 3 Cylinder Air Compressor Pump Brand new three cylinder cast iron single stage air compressor pump. This is a 4-5 horsepower pump that will deliver up to 10-12 CFM depending on the RPM. This pump is most commonly used on compressor tanks about 60 gallons in size and can be used with 220-volt 4-5 horsepower electric motors. To verify your motor is large enough, it should be around 17-22 amps at 220 volts. All specifications listed on pump-spec plate are ratings at minimum horsepower and RPM. This pump comes complete as shown in the photos, including intake filters and flywheel. See specifications below for more details.  Features: • Cast Iron Cylinder and Crankcase • Equipped with Sight Glass for Easy Viewing of Oil Level • Comes with Three Intake Filters • Low Oil Consumption Specifications • Three Cylinder • Single Stage • 4-5 HP • Cylinder Diameter: 65mm • Maximum Recommended Working Pressure: 115 PSI • Recommended RPM: 1000-1200 • CFM: 10-12 Max • Flywheel Diameter: 10.5" Mounting Hole Dimensions Center to Center • Front to Back: 5.2" • Side to Side: 8.43"